Varaosanumero
D846 A7; D-846 A7; MK100; MK110; LTM 1100
Valmistenumero
D846 A7; D-846 A7; MK 100; MK 110; LTM 1100
Sopii seuraaviin
Liebherr:
Liebherr D 846;
Liebherr D 846 A7;
Liebherr MK 100;
Liebherr MK 110;
Liebherr LTM 1100;
Kunto tiedot/Takuu
12 months
Lisätietoja
The offer includes regenerated exhaust gas recirculation (EGR); exhaust gas cooler for Liebherr MK 100 D 846 A7
Used in Liebherr:
– MK 100;
– MK 110;
– LTM 1100;
Engine:
- D 846 A7
Regenerated exhaust gas recirculation for Liebherr MK 100 D 846 A7 – product description
The Liebherr MK 100 D 846 A7 exhaust gas recirculation unit reconditioned in Poland, has undergone a heavy leak-tightness test before shipment to the customer.
The product comes with a 12-month warranty, with no mileage limits.
Regeneration of Liebherr MK 100 D 846 A7 exhaust gas recirculation
Regeneration is the process of restoring used elements to their original technical and operational properties.
In the case of regeneration of the Liebherr MK 100 D 846 A7 exhaust gas recirculation (EGR) to Liebherr, it consists in replacing the shell-and-tube cooler inside with a completely new one along with the replacement of gaskets, O-rings and throttle elements.
This process allows to obtain the original properties of the recirculation valve while retaining the old body, which translates into purchase costs and environmental impact.
Operation of the exhaust gas recirculation valve Liebherr MK 100 D 846 A7
The mechanism of the Exhaust Gas Recirculation (EGR) valve is simple.
For the efficient operation of the drive unit, it is necessary to lower the temperature in the combustion chamber.
It is an external exhaust gas recirculation system in which the exhaust gas recirculation (EGR) is used, which is located on the engine exhaust manifold, from where part of the exhaust gas goes to the intake system.
An efficiently operating Liebherr MK 100 D 846 A7 exhaust gas recirculation valve (EGR) also reduces the emission of harmful nitrogen oxides by several dozen percent.
An efficient EGR valve makes it possible to effectively control and control the amount of exhaust gases returned to the engine.
Basic signs of damage to the exhaust gas recirculation for Liebherr MK 100 D 846 A7;
– excessive fuel consumption
– uneven engine operation, mainly at idle speed
– noticeable decrease in engine power
– greater wear of other components (engine, turbine, exhaust system)
– engine overheating
– in extreme cases, total engine damage, including its “seizure”
If you have not found the EGR cooler you are looking for or you do not have the OE part number – nothing is lost, please contact us, we will find it for you
We are at your disposalNäytä lisää 
6
Suosikki
Jaa
Tallenna haku
Raportoi epäilyttävä ilmoitus