Wacker Neuson ET18 Mini Excavator Wacker Neuson ET18D

General data: Brand, model: WACKER NEUSON ET18 (E12-02) Type of equipment: Mini crawler excavator Serial number: WNCE1202CPAL04066 Year of manufacture: 2018 Mileage: 4088 hours Technical data of the valuation item: Operating weight: 2,117 kg Transport weight: 1,582 kg Travel speed: 2.5 – 4.3 km/h Digging force – arm / bucket: 11,200 / 18,800 N Slewing speed: 10 rpm Engine: Model: YANMAR 3TNV76 ISO engine power: 13.8 kW / 2,200 rpm Type: diesel Displacement: 1,116 cm³ Number of cylinders: 3 Undercarriage: Track width: 230 mm Total machine width: 990 – 1,300 mm (hydraulically adjustable) Hydraulic system: Pump capacity: 73 l/min Working pressure: 200 bar Tank capacity: 19 l System capacity: 33 l Dimensions: Total length: 3,854 mm Total width: 990 mm - 1,300 mm Total height: 2,392 mm (with cab) Ground clearance: 210 mm Equipment: - VDS system (cab tilt up to 15°) - Rubber tracks, - Folding blade, - Full cab with heating, - Radio-ready, - Additional hydraulic outlet on the arm, - Digging bucket approx. 500 mm wide, no teeth, - Quick coupler. Technical Condition Description Nameplate: - Location – front frame. - Tampering/irregularities – partially torn, bent. Identification Number: - Location – not located. Technical Documentation: - Owner''s Manual – none, - Parts Catalog – none, - Technical Specifications – none CE/EC Certificate: - Marking – yes, - Declaration/Certificate of Conformity – none. Operation History: - Service Documentation – Inspection Booklet – none. - Periodic Inspection Markings – YES – WACEKR NEUSON sticker dated January 16, 2020, with 1190 km/h, marking on the inside of the engine cover – "14.08.2024 OIL + FILTERS", on-board computer reading – 388 km/h until the next service interval. Year of manufacture: - 2018 - determined based on permanently marked markings on the factory nameplate. Technical condition: - Visual condition - satisfactory, - Wear - directly proportional to age and mileage. - Engine started, engine operation within the tested range is correct. Air filter housing shows signs of temporary repairs - left mounting bracket missing. - Running gear - no visible defects, running gear test performed without load - no irregularities found. Tracks with minor cracks and material loss. Track bogie frame significantly scratched with corrosion. - Working gear - working gear test performed without load - no irregularities found, play consistent with mileage. Arm scratched with chips and corrosion. Paint damage on actuators. - Damaged machine parts requiring repair/replacement: Body: - outer frame – scratched, chipped, corrosion spots, - lower left cover – dents, chipped, corrosion spots, - counterweight – scratched, chipped, - engine compartment cover – scratched, dents, soundproofing with defects, - lower windshield – temporary, - radio antenna – torn from its mountings, incomplete, - cab side covers – chipped, scratched, - windshield frame – corrosion spots. Cabin: - Fan vents – broken and missing, - Door lock cover – broken, - Windshield and upper window opening mechanism – with signs of repair (welds), missing pin on the left side, - Left joystick – missing outer part of the upper button, - Right joystick – missing outer part of the lower button. Missing: - Arm work lamp, - Radio antenna mast, - Arm hydraulic cylinder cover, - Exterior mirrors with arms, - Rear cab work lamp. Other: Number of keys – 1 pc. = More information = Type number: Mini Excavator Wacker Neuson ET1