RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoKaikki kategoriat
Ilmoita!

Toro STX26

Veroton hinta

Compnay LOGO
Images1
Toro STX26 Kantojyrsimet
FavoriteSuosikki
shareJaa
Save searchTallenna haku
Tulosta

INFO

Tuoteryhmä
Kantojyrsimet
Merkki / malli
Toro STX26
Vuosimalli
2016
Sijainti
Fontana, California
Maa
Yhdysvallat
Yleisarvosana
1
2
3
4
5
Mascus ID
C2FB00FB

HINTA

Toisessa valuutassa

LISÄTIEDOT

Varastonumero
2023035
Lisätietoja
2016 - Toro STX-26 Walk Behind Stump Grinder, Gas Engine, Intelli-Sweep System, Rubber Tracks, Hydraulic Driven Cutting Wheel, 19" Cutting Wheet with 12 Teeth, 12.5" Cutting Depth, Low 789 Hours, Excellent Condition! Note: Inbound Unit! More Photos and Video Coming Soon! Track Design • Allows for zero turn capability • Provides a low center of gravity and large footprint • Increased stability on side hills • Eliminates tire ruts and flat tires • Operates in wet & soft ground conditions. Full Hydraulic Operation • Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches • No need to replace expensive cogged pulleys • No worry of customers engaging grinder head at full throttle • Eliminate shock loads to the engine by belts slipping or head stopping Traction Controls Easy-to-use control system offers smooth operation and fewer lever & nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions. 1) Left and right traction control (forward, reverse, turn) 2) Sweep, lift & lower and engagement of grinder head. Offset Cutting Head • Provides operator with excellent visibility to stump • Allows full rotation perpendicular to machine Custom Trailer Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires. Specifications Cutting Depth: 12.5" below grade Cutting Wheel: 19" diameter to tooth; 0.75" thick, 12 green teeth Cutting Height: 35" above grade Head Swing: 47" Arc Hydraulic Flow: 13.5 gpm hydraulic flow to head Engine: Kawasaki 730V Twin Cylinder Dimensions: 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H Weight: 1200 lbs. (545 kg) 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) HNäytä lisää

ReQuip Corporation

16516 Washington Dr 92335 Fontana California Yhdysvallat
Vastaanota ilmoitus sähköpostilla
Näytä yrityksen ReQuip Corporation kaikki ilmoitukset
report adRaportoi epäilyttävä ilmoitus