RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoKaikki kategoriat
Ilmoita!

Toro STX26

Veroton hinta

Compnay LOGO
Images5
Toro STX26 Kantojyrsimet
Toro STX26 Kantojyrsimet
Toro STX26 Kantojyrsimet
FavoriteSuosikki
shareJaa
Save searchTallenna haku
Tulosta

INFO

Tuoteryhmä
Kantojyrsimet
Merkki / malli
Toro STX26
Sijainti
Fontana, California
Maa
Yhdysvallat
Mascus ID
FF99E594

HINTA

Toisessa valuutassa

LISÄTIEDOT

Varastonumero
2021041
Valmistusmaa
Yhdysvallat
Lisätietoja
Toro STX-26 Walk Behind Stump Grinder, Gas Engine, Intelli-Sweep System, Rubber Tracks, Hydraulic Driven Cutting Wheel, 19" Cutting Wheet with 12 Teeth, 12.5" Cutting Depth, Low 754 Hours, Excellent Condition! Track Design • Allows for zero turn capability • Provides a low center of gravity and large footprint • Increased stability on side hills • Eliminates tire ruts and flat tires • Operates in wet & soft ground conditions. Full Hydraulic Operation • Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches • No need to replace expensive cogged pulleys • No worry of customers engaging grinder head at full throttle • Eliminate shock loads to the engine by belts slipping or head stopping Traction Controls Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions. 1) Left/right traction control (forward, reverse, turn) 2) Sweep, lift/lower and engagement of grinder head. Offset Cutting Head • Provides operator with excellent visibility to stump • Allows full rotation perpendicular to machine Custom Trailer Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires. Specifications •Cutting Depth: 12.5" below grade •Cutting Wheel: 19" diameter to tooth; 3/4" thick, 12 green teeth •Cutting Height: 35" above grade •Head Swing: 47" Arc •Hydraulic Flow: 13.5 gpm hydraulic flow to head •Engine: Kawasaki 730V Twin Cylinder •Dimensions: 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H •Weight: 1200 lbs. (545 kg) •34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) HNäytä lisää

ReQuip Corporation

16516 Washington Dr 92335 Fontana California Yhdysvallat
Vastaanota ilmoitus sähköpostilla
Näytä yrityksen ReQuip Corporation kaikki ilmoitukset
report adRaportoi epäilyttävä ilmoitus