|Lisätietoja||Description: The Barko 295B RTC packs ample power into a compact package, while pilot operated controls and enhanced serviceability contribute to exceptional operating efficiency.|
ROUGH TERRAIN CARRIER FRAME
The Rough Terrain Carrier is built with a rigid frame that provides far more stability than articulated carriers, allowing operators to maneuver safely without sacrificing performance.
The RTC delivers extraordinary drawbar pull of 21,000 pounds, enough to pull a small log trailer, easily move through mud, and even climb steep grades of up to 45-percent.
4-wheel, 2-wheel and crab steering capabilities allow for effective maneuvering in tight spaces. With all four wheels maintaining ground contact to provide proper support, the RTC can easily navigate from pile to pile to maximize efficiency.
Using 4-wheel-steer, the machine's 18-foot turning radius is sharper than many half-ton pickup trucks.
With ability to travel up to 12 mph in high gear, the RTC won't drain your productivity every time you have to move across the yard.
Two sets of foldaway stabilizers further contribute to keeping loads steady.
The 295B is powered by a 173-HP Cummins QSB6.7 Tier 4 diesel engine with SCR aftertreatment.
HYDRAULIC CONTROL SYSTEM
The 295B features a pilot-operated control system, in conjunction with IQAN electronic controls, to provide a more natural feel for the operator. The system can be configured as necessary, and maintenance can be performed simply without a specialist.
LOAD SENSING HYDRAULICS
Unlike open loop systems that waste fuel, Barko's efficient load sensing system delivers power only when needed. Load sensing valves and pump deliver excellent metering by matching pressure and flow. Adaptable to most attachments, the system runs cool. Efficient and precise grapple functions reduce operator fatigue.
Multi-functional dual joystick controls are ergonomically designed to provide enhanced comfort and productivity.
Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.
Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.
Dual motors and planetary gearboxes produce 30,000 foot-pounds of swing torque, while improving machine balance.
Standard 3,000-pound cast steel counterweight provides extra stability.
ZINC PLATED PINS
Extra large zinc plated pins and bolts provide added durability in high-stress areas.
Centralized hydraulic control valves are easily accessible outside cab door.
BOLT-ON CYLINDER GLANDS
Bolt-on cylinder glands make on-site service easy, while piston rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.
Centralized turntable greasing system and removable service panels simplify maintenance tasks.
Vibration-isolated "floating cab" provides a smoother ride. Weather sealed, insulated and climate controlled, the cab includes a suspension seat with armrests, foot swing controls, swing out entry door, front guard and halogen lights. Walk-up steps and a solid platform minimize the potential for slip-and-falls when entering the cab.
Digital display provides enhanced monitoring of all machine functions.
Tinted windows, including roof, rear and sliding side windows, provide 360-degree visibility for safer operation.
120-gallon (454 L) fuel tank capacity allows for longer operating intervals.
14' 2" | 432
Overall Loader Length
39' | 1,189 cm with 30' boom extended & 3,000 lbs counterweight
1" | 25 mm
19" | 48 cm
9' 11" | 302 cm
15' 2" | 462 cm
10' 3" | 312 cm
8' 10" | 269 cm with 3,000 lbs counterweight
14' 2" | 432 cm
8' 4" | 254 cm
Approx. Operating Weight
41,500 lbs | 18,824 kg without attachment
Rough Terrain Carrier
12.0 mph | 19.3 km/h high gear, 3.4 mph | 5.5 km/h low gear
25,000 lbf | 111.2 kN low gear, 6,100 lbf | 27.1 kN high gear
Primary: Hydrostatic dynamic braking mechanism; Secondary: Hydraulic disc brakes on all 4 wheels, operated by foot pedal; Park: Spring applied hydraulic release (SAHR)
Planetary drive axles front and rear; front oscillates (with hydraulic oscillation lock), rear rigid to frame
2-speed hydrostatic drive
Hydraulic 4-wheel steer; front axle controlled by joystick axis, rear axle controlled by buttons on joysti
Inventory Location: Traxplus