Exmark LZE740EKC60400

Veroton hinta
5 871 EUR
Veroton hinta
5 871 EUR
Tuoteryhmä0-kääntösäde leikkurit
Merkki / malliExmark LZE740EKC60400
Käyttötunnit1638 h
SijaintiMalvern, Pennsylvania
Mascus IDD27383CB
Toisessa valuutassa
Veroton hinta5 871 EUR
ALVEi sisällä arvonlisäveroa
Verollinen hinta-
Moottorin teho19,1 kW
LisätietojaTransmission Speed: Hydro
Fuel Type: Gas
Description: 2016 ExmarkSPECIFICATIONS
Air Filter Heavy-duty canister air filtration system
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Carb Compliant No
Casters .50" thick caster yoke arms.
Curb Weight 1115
Cutting Heights 1.0" (2.5 cm) to 5.5" (14.0 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Drive Wheel Release Allows unit movement without engine running.
Electrical 12-volt battery with 20-amp alternator.
Engine Brand Kohler
Engine Displacement 747
Engine Model ECV740
Engine Series Command™ EFI
Engine Speed 3,750 rpm
Fuel System Electronic Fuel Injected
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Fuel Type Gas EFI
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Parking Brake Lever-actuated disc brake.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Seat Two tone bolstered seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Width 72.8 in. (184.9 cm)
Width / Cutting Deck 60"
Express Financing
Get a
Inventory Location: PowerPro Equipment - Malvern

Power Pro Equipment

+1 7...NÄYTÄ
Kerro myyjälle, että näit tämän ilmoituksen Mascuksessa.
Lähetä sähköposti

Myyjän tiedot


    Power Pro Equipment
    • +1 7...NÄYTÄ
      Kerro myyjälle, että näit tämän ilmoituksen Mascuksessa.
    • 780 East Main St, New Holland PA 17557-1599, Yhdysvallat



Vastaavat merkit

MerkkiIlmoitusten määrä
John Deere1241

Mascuksesta löydät Exmark LZE740EKC60400 merkkisiä koneita 0-kääntösäde leikkurit kategoriassa. Tämän Exmark LZE740EKC60400 hinta on 5 871 € ja se on valmistettu 2016. Koneen sijainti on Malvern, Pennsylvania Yhdysvallat. Mascuksesta löydät Exmark LZE740EKC60400 merkin lisäksi myös kaikki muut merkit katekoriasta 0-kääntösäde leikkurit. Lisätiedot - Varastonumero: T190059, Käyttötunnit: 1638 h, Kokonaispaino: , Valmistenumero: 316639760, Moottorin teho: 19,1 kW